ADJUSTABLE WAND ASSEMBLY

One of the great products we sell at Doug Rucker Store is the pressure washing gun as well as an adjustable wand.  In order to help our customers, we provide a step by step video to assist with putting it all together.  The pressure washing gun comes complete with the Suttner ST-2305 Safety Orange Easy-Pull Trigger Gun, a 1/4-inch Mosmatic Gun Swivel, a 12-inch Suttner Star-Shaped Grip Wand, a 1/4-inch FPT quick coupler, and a 3/8-inch MPT quick coupler.  This is the gun set up I use for soft washing via down streaming for house and building washing. The gun is very easy to use and the trigger is very easy to hold open.  The adjustable wand is a straight lance with better seals that last longer than other models.  This ADJUSTABLE WAND ASSEMBLY video provides detailed instructions including connectors, tools and other details.

TOOLS NEEDED

Open ended wrenches are my preferred tool in this case.  However, an adjustable wrench will also work if that is your preference.  You will also need teflon tape, thread sealant and a screwdriver.  In the video, I cover exactly which tools are needed for which parts.

MOSMATIC SWIVEL for ADJUSTABLE WAND

One of the first decisions for the adjustable wand assembly is whether to use the mosmatic swivel.  This allows you to rotate or twist the wand without having to bend the hose.  Thus, the advantage is being able to change the angle of the pattern on the end of the nozzle.  In some cases you need a horizonal spray, and in other cases you need vertical spray.  The mosmatic swivel makes this process much easier without having to stop, reach out, and turn the nozzle to the desired angle.  This saves time on the job and makes the entire cleaning process much easier and less exertion on your body. If you are looking for a soft wash gun, check out this post.  Best Soft Wash Gun – Doug Rucker’s Pressure Washing School