by Dean Dean

PRESSURE WASHER WATER SUPPLY

PRESSURE WASHER WATER SUPPLY

This PRESSURE WASHER WATER SUPPLY video post from Doug Rucker will help power wash business professionals.  There is a banjo fitting hook up for a garden hose water supply on the Doug Rucker Store website.  One end of the hook up goes on the garden hose and stays there permanently.  The other piece you would keep in your truck, but pull out to use once you’re ready to hook up to the customer’s water supply.  This other piece that goes on the faucet and allows for a faster, easier and more convenient connection.  Not only does it save time and effort, but eliminates a lot of faucet connection leaking issues.

TWO WATER SUPPLY CONNECTORS

Notice there are two PRESSURE WASHER WATER SUPPLY adapters.  They are essentially the same thing except the fittings are inverted.  At the 4:30 video time stamp, I explain which one I use and why I prefer it.  Both will work effectively and it is simply a personal preference.  The main to remember is don’t forget to remove the faucet fitting hookup after each job.  Keep it handy in your truck for the next job.  I also take a little extra time in this video to mention another important tip relating to rolling up your hoses.  You don’t want fittings, hookups, guns and ball valves dragging on the ground and risking damage on the concrete.  Even in the grass, roots, rocks, and other things could damage whatever you have on the end of the hose.

ADDITIONAL TRAINING OPPORTUNITIES

Be sure and check out our monthly hands on training opportunities through my Pressure Washing School.  You’ll have a unique opportunities to test and feel our various pressure washers and surface cleaners, as well as classroom learning.  And if you can’t make it to Houston, our online video school is ideal for those wanting to start their own power wash business.  We also have Pat Clark’s SALES BOOST videos available for those have been in the business for a few years and are looking to grow, expand and scale.

 

 

by Dean Dean

POWER WASH TRUCK SETUP

POWER WASH TRUCK SETUP

In this POWER WASH TRUCK SETUP video post, Doug Rucker walks you through another custom build.  This six foot truck bed skid is for a customer who works in Katy, Texas.  We start with a 200 foot fierce jet pressure hose on a Kings Reel.  Then the soft wash hose also has a soft wash ball valve gun and jrod nozzle kit.  Then you will notice a flexilla garden hose which hooks up to the customer’s water supply also on a King’s Reel.  This hose fills a water tank which is equipped with a jobe float valve which stops the water flow once the tank is full.  There are two 100 gallon tanks, one for water and one for bleach.

 

SOFT WASH SYSTEM

This POWER WASH TRUCK SETUP comes equipped with our proprietary electric soft wash system we call THE SOFT E.  In this particular build, we put this inside of a large protective aluminum chrome box.  The main idea here is to deliver a 50/50 mix for roof cleaning and other soft washing projects.  For the basic differences between soft washing and pressure washing, check out this video.  He also has a 5.5 GPM gear drive pressure washer machine because we’re working with a limited amount of space and footprint to work with on this particular POWER WASH TRUCK SETUP build.  The gas tank is built into the machine, so a separate gas tank does not eat up extra space.  Whether we call it gear drive or belt drive, that pretty much refers to the same thing.

FLOW PRO REMOTE

The POWER WASH TRUCK SETUP also includes a FLOW PRO REMOTE bypass system for downstreaming.  At approximately 3:3o, I explain why it’s so important to remove this mechanism during transport.  If you have any questions whatsoever about our custom builds, don’t hesitate to email INFO@DougRuckerStore.com.  You could also call or text 281-612-1223.  And if you prefer, you could reach out directly through our website contact us online form.  We strive to make it as easy and convenient for you as possible to contact us.  Check out all of our training opportunities here.

 

by Dean Dean

Building a Power Wash Trailer

BUILDING A POWER WASH TRAILER

We are always glad to help pressure washing business owners when Building A Power Wash Trailer.  In fact, we we work closely on this with owners from all over the United States.  Whether it’s a truck, van, or trailer, we build open air and enclosed rigs.  In this example, we are building a power wash trailer for a father son team from Lafayette, Louisiana.  This video provides customer testimony regarding the exceptional service and prompt communication we provide.  We even provide training to ensure you know how to use all the equipment effectively and efficiently.  They even won some homemade cookies!  (But the gift box is not included! :). We appreciate their business and provide a full walk around and equipment breakdown in this video.

TRAILER SPECIFICATIONS

This 20 foot trailer was brought to us and starts with an 8 GPM Largo Hot Water Pressure Washer.  It also includes an 8 GPM Largo cold water pressure washer.  Both of these machines rely upon the Honda GX 690.  He uses two large square tanks for water with the banjo valve for fast and easy draining.  He also has a smaller tank to use for degreasers but plans to switch that out to a larger tank.  There are some other plumbing items I cover in detail in this video so be sure and watch it in its entirety.

TRAILER BUILD HOSES

The hoses on this set up are one flexilla garden hose and two fierce jet pressure hoses.  These hoses stack nicely on the King’s Reel stack kit.  There is an additional 18 inch soft wash reel with a Soft Jet Soft Wash Hose which connects to the SOFT E.  The Soft E is the electric version of the Kingslinger Soft Wash System.  This is a light weight, portable system that requires very little footprint.  For additional pressure washing business supplies, check out Doug’s Link Deals on my school website.    If you ever need help BUILDING A POWER WASH TRAILER, don’t hesitate to let us know.

by Doug Rucker Doug Rucker

PRESSURE WASHER FILTER VIDEO

PRESSURE WASHER FILTER VIDEO

This PRESSURE WASHER FILTER VIDEO explains in detail installing and maintaining a very important pressure washer element.  It’s the HIGH PRESSURE INLET FILTER that is the subject of this post!  When and where are they used?  How do they work?  What do I do to maintain them?  Those are the questions this PRESSURE WASHER FILTER VIDEO answers!  Thank you for watching and be sure to ask questions in the comments section of this YouTube video!

CONNECTION WITH SURFACE CLEANER

In this PRESSURE WASHER FILTER VIDEO, I explain the various sizes they come in.  And I talk about how I connect them to my surface cleaner, as well as how easy they are to move between surface cleaners.  These high pressure filters can handle 5000 psi and about 200 degrees Fahrenheit heat.  At 2:30, you’ll see the small screen inside the filter housing that will trap or catch debris from the water flow.  It is 100 micron mesh.  Also, it is easy to take it out and clean it when necessary.  This filter helps keep surface cleaner nozzles from getting clogged with sand or debris moving in the water.  The one I use is a 3/8 size inlet.  Pay close attention to the arrow on the filter that designates the water flow direction.  Also in this PRESSURE WATER FILTER VIDEO is the reminder to use teflon tape and seal with loxeal to prevent leaking.

CONNECTION WITH TURBO NOZZLE

At 5:20 of this PRESSURE WASHER FILTER VIDEO, another size is the quarter inch.  You should utilize this size most commonly on turbo nozzles.  It can also be helpful for smaller surface cleaners.  I clearly explain in detail how this particular filter size connects to a turbo nozzle.  At 6:45, you’ll find some great insight on maintenance demonstrations of these filters in various sizes.  I provide MONTHLY TRAINING EVENTS to help pressure washing businesses expand their services and grow their business!

 

by Doug Rucker Doug Rucker

PRESSURE WASHER PARTS VIDEO

PRESSURE WASHER PARTS VIDEO

This PRESSURE WASHER PARTS VIDEO features a mount box for three way valves.  The Doug Rucker Store physical address is 25432 TX-494 Loop in Porter, Texas.  We are in the Humble or Kingwood area just northeast of Houston.  Please stop in and see us if you are in the Houston area!  I want to thank all of our loyal YouTube viewers and especially the one who sent me a mount box we features in this PRESSURE WASH PARTS VIDEO.

BIG DOWNSTREAM FAN

If you have known me for any length of time, you know how big a fan I am of down streaming.  We can get most houses and buildings that are moderately dirty cleaned up nicely utilizing the down stream method.  For more heavily stained surfaces and higher areas, we use the Kingslinger Soft Wash System.  For many years, I have been relying on a poly three way ball valve.  In the video, I explain why and how I use it.  It enables us to switch from bleach to water for rinsing while down streaming.  We would normally zip tie or hose clamp the three way valve to the truck or trailer.  You see this is the PRESSURE WASHER PARTS VIDEO above.

PRESSURE WASHER MOUNT BOX

A long time viewer and customer of ours named Ricky recently sent me a mount box.  We are able to place the three way valve inside this box that also has mounting screw holes.  This keeps the three way ball valve braced and makes it easier to turn the valve when necessary.  At 4:45 of this PRESSURE WASHER PARTS VIDEO, I go over the plumbing.  And how the three way valve connects to various sources.  We also discuss how it incorporates into our Flow Pro Remote Bypass System with our downstream injector.

 

by Doug Rucker Doug Rucker

FLOAT VALVE VIDEO

FLOAT VALVE VIDEO

This FLOAT VALVE VIDEO features me sharing from years of experience testing various water tank float valve devices.  As I am building another custom truck order, this is a great time to address concerns that arise with float valves.   Thanks so much for watching and be sure to leave a comment with any questions you might have. about this FLOAT VALVE VIDEO.

HUDSON FLOAT VALVE

The most common one that I have used for the last twenty plus years is the Hudson Float Valve.  But this particular model can be very temperamental and would sometimes fail to be effective.  When this happens, you see water shooting out from the breather tube on the tank.  So over a year ago, I did some research to find a better alternative because of the frustration I experience using the Hudson model.  This is when I began using and testing JOBE brand float valves.

JOBE FLOAT VALVE

There are a couple of different models by Jobe and one of them has a string.  But my preference is the one without the string which utilizes an arm rather than string.  This particular model allows more water flow into your tank which results in filling the tank much faster.  It is the Topaz Model and it is much easier to install and more hassle free to use.  The General Pump Float valve is another popular brand and model that a viewer recently brought to my attention.

INSTALLATION INSTRUCTIONS

At the 5:00 mark of this FLOAT VALVE VIDEO, I provide extensive installation instructions.  In addition to the tools you will need, there are also other parts that you need.  Installation instructions are given for the Hudson, then the Jobe, then the General Pump.  Drilling holes and installing bulkhead fittings are also part of the demonstrations in the FLOAT VALVE VIDEO.  I hope this helps and I’d like to invite you out to Houston for my next monthly school.  This two day event includes classroom instruction and actual hands on training at a job site.

 

 

 

by Doug Rucker Doug Rucker

Pressure Washing Startup Video

PRESSURE WASHING STARTUP VIDEO

In this PRESURE WASHING START UP VIDEO, I cover the equipment you need.  While our physical location is in the Houston, Texas region, we proudly serve all 50 states through my online school and store.  Not only do I show you the equipment you will need, I also demonstrate it in use outside.  My passion is helping new startups build their business!  So thanks for checking out my PRESSURE WASHING STARTUP VIDEO.

PRESSURE WASHER MACHINE

I recommend starting your business with the Kohler 4 GPM pressure washer.  It is a B.E. with Kohler engine and when money is lean and the budget is tight, this is a great way to start!  If you do have any questions about this machine or any of the equipment in this PRESSURE WASHING STARTUP VIDEO, be sure ask it in the comments section.  I always reply personally and try to respond to questions in comments in a timely manner.  This is professional grade machine that will assist cleaning houses and even small commercial buildings.

SURFACE CLEANER

The Whisper Wash Ultra Clean surface cleaner is another highly recommended attachment for your power wash business.  I change the nozzles due to the strong power resulting in the machine lifting or rising up from the surface.  I don’t really like this so the nozzles I use prevents this from occurring on the job.  It’s light weight, versatile, and easy to maneuver on the job.

PRESSURE WASH GUN

You definitely need the pressure wash gun assembly with the Suttner safety orange easy pull trigger.  At the 7:00 time stamp, I demonstrate how this gun can works when down streaming.  You can also use it with various nozzles that enable rinsing as well as reaching higher surface areas.  This is when a J ROD kit is extremely handy.  Be sure and watch the entire video to take advantage of all the tips and tricks.  I sure hope this PRESSURE WASHING STARTUP VIDEO helps you build your new business.  Don’t hesitate to reach out if I can help in any way!

 

by Doug Rucker Doug Rucker

POWER WASHING BUSINESS TOOLS

POWER WASHING BUSINESS TOOLS

In this POWER WASHING BUSINESS TOOLS video, I am working on a trailer build.  This trailer rig is for a local customer out of Cleveland, Texas.  But we provide truck, trailer and van builds for customers from all over the U.S.  In fact, a customer from Atlanta, Georgia will picking up his service body truck very soon.  So this is a great time as I finish these builds to provide more details on some of the tools I use.  Be sure and leave a comment with any questions you might have about this POWER WASHING BUSINESS TOOLS video.

JROD NOZZLE TOOLS

There are seven different JROD NOZZLE OPTIONS to choose from on my store website.  In this particular truck build order, he is getting the KINGSLINGER nozzle option.  I always advise purchasing two so that you have a spare if one of them fails or gets lost or damaged for some reason.  We also include a 3 JROD NOZZLE HOLDER for the pressure washer.  I give ample details for when and how these various nozzles are used on the job as well as installed on the rig.  Also, for many of these tools, you have the option of ready to use or DIY.  For DIY items, you can save a little money and assemble parts yourself.  My preference was always to have tools arrive ready to use to save time.  But as I explain in this POWER WASHING BUSINESS TOOLS video, you select the option on the website you prefer.

DOWNSTREAM INJECTOR CHECK VALVE

He already has one but is getting two more as back ups.  Pay close attention to the arrows making sure they point toward the gun.  We always operate with a basic principle in mind.  The plug points the way the water flows.  Another important aspect I emphasize in this video is using thread tape and loxseal to prevent leaking.  You might also enjoy checking out “Doug’s Link Deals” with various items I use that might be helpful in your business as well.

OTHER POWER WASHING TOOLS

Rounding out the list of helpful Power Washing Business Tools in this video includes an adjustable wand and ball valve setup.  I also cover the pressure wash gun assembly.